Speaker Connections - Orion 4004 Owner's Manual

Speaker Connections

Four Channel Stereo Configuration
Front and rear channel lowest recommended impedance is 2W stereo.
Crossover mode, output, and gain configurations are independently adjustable
between the front and rear channels.
Two-channel or four-channel input can be used for this configuration. For source
unit fading, use the four-channel input mode.
Front and rear outputs can be configured for high-pass, low-pass, or full range
operation.
Three Channel Stereo/Bridged Configuration
Front channels are configured for two-channel stereo operation.
Front channel lowest recommended impedance is 2W stereo.
Rear channels are configured for a single channel bridged output.
Rear channel lowest recommended impedance is 4W.
Crossover mode, output, and gain configurations are independently adjustable
between the front and rear channels.
Two-channel or four-channel input can be used for this configuration. For source
unit fading, use the four-channel input mode.
Front and rear outputs can be configured for high-pass, low-pass, or full range
operation.
Rear outputs are configured for summed bridged operation for subwoofers.
8
©2004 Directed Electronics, Inc.