Recording Movies; To Record A Movie - Casio Exilim EX-ZR10 User Manual

Recording Movies

To record a movie

The following procedure explains how to record a standard (STD) movie.
See the pages indicated below for more information about movies.
High-definition movie (FHD movie): page 57
High speed movie (HS movie): page 57
1.
In the REC mode, press [MENU].
2.
Use [4] and [6] to select the "Quality" tab.
3.
Use [8] and [2] to select "» Quality" and
then press [6].
4.
Use [8] and [2] to select "STD" (Standard),
and then press [SET].
• Recording is performed with an aspect ratio of
4:3, an image size of 640
frame rate of 30 frames per second (STD Movie).
Image size setting cannot be changed.
• The semi-transparent gray frame on the monitor
screen indicates the area that is recorded when
shooting a movie. The area within the frame is
recorded for a movie.
5.
Press [0] (Movie).
This will start recording and display Y on the
monitor screen.
Movie recording includes stereo audio.
6.
Press [0] (Movie) again to stop recording.
• Each movie can be up to 29 minutes long. Movie
recording stops automatically after 29 minutes of
recording. Movie recording also will stop
automatically if memory becomes full before you
stop movie recording by pressing [0] (Movie)
again.
B
480 pixels, and a
x
54
[0] (Movie)
[MENU]
Semi-transparent gray
frame
Remaining recording time
(page 186)
Recording time
Recording Movies