Creating A Snapshot Of Movie Frames; Editing A Movie On The Camera - Casio Exilim EX-ZR10 User Manual

Creating a Snapshot of Movie Frames (MOTION PRINT)
Procedure
[p] (PLAY) * Movie Screen * [MENU] * PLAY Tab *
MOTION PRINT
1.
Use [4] and [6] to scroll through the movie frames and display the one
you want to use as the image of the MOTION PRINT image.
Holding down [4] or [6] scrolls at high speed.
2.
Use [8] and [2] to select "Create" and then press [SET].
• Only the frames of movies recorded on this camera can be used in a MOTION
PRINT image.
Editing a Movie on the Camera (Movie Editing)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
Cut
}
(To-Point Cut)
Cut
~
(Point-To-Point Cut)
Cut
¡
(From-Point Cut)
1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use the following operations to select the frame
(point) from which or to which you want to cut
the movie (the cut point).
During playback, changes the playback
[4] [6] direction and playback speed. While
playback is paused, scrolls forward or back.
[SET] Toggles between pause and play.
Cuts everything from the beginning of the movie up to the
current location.
Cuts everything between two points.
Cuts everything from the current location to the end of the
movie.
112
Cut range (yellow)
Other Playback Functions (PLAY)