Introduction; Scope Of Validity; Designations Used; Supplementary Documentation - Siemens SIMATIC NET SCALANCE XCM-300 Product Manual

Introduction

These operating instructions will help you to install and connect devices of the SCALANCE
XCM-300 product group.
The configuration and the integration of the devices in a network are not described in these
operating instructions.
1.1

Scope of validity

These operating instructions apply to the following devices:
• SCALANCE XCM332
Unless mentioned otherwise, the descriptions in these operating instructions refer to all devices
of the SCALANCE XCM-300 product group specified in the scope of validity.
1.2

Designations used

This section describes the conventions used in this document to clearly and efficiently portray
information.
Classification Description
Product line The product line includes all devices and variants of all product groups.
If information applies to all product groups within the product line, the term
SCALANCE X-300 is used.
Product group If information applies to all devices and versions of a product group, the term
SCALANCE XCM-300 is used.
Device If information relates to a specific device, the device name is used.
1.3

Supplementary documentation

The following additional documents may be of interest. Unless specified otherwise, the
documents are available in the Siemens Industry Online Support (SIOS)
support.industry.siemens.com/cs/ww/en/ps/15247).
Note
The listed documents are the documents that were available at the time of the publication.
Newer versions of these documents or the associated products may be available. Additional
information is available in the SIOS or contact your Siemens customer service.
SCALANCE XCM-300
Product Manual, 04/2022, C79000-G8976-C585-01
1
Terms used
SCALANCE X-300
SCALANCE XCM-300
e.g. SCALANCE XCM332
(https://
7