Table of Contents
Advertisement
Technical safety
The vacuum cleaner operates at 25.2 V.
It is classified as a class III appliance.
This appliance is supplied by a safety extra-low voltage (SELV)
power source where the voltage is low enough to protect users from
the risk of electrical shock. A Class II charger is used for supplying
power to charge the vacuum cleaner.
Compare the connection data on the data plate of the charger
(voltage and frequency) with that of the mains electricity supply. This
data must match exactly. Without modifications, the charger is suit-
able for 50 Hz and 60 Hz.
The mains electrical plug must be fitted with an appropriate fuse.
Before using the vacuum cleaner and its accessories, check for
any visible signs of damage. Do not use a damaged appliance.
The Miele Multi Floor XXL Electrobrush and the Miele Electro
Compact handheld brush (varies according to the model) are addi-
tional motor-driven devices designed specially for this Miele vacuum
cleaner. For safety reasons, the vacuum cleaner must not be used
with a different Miele Electrobrush/handheld brush or an Electro-
brush/handheld brush produced by another manufacturer.
Before and during use, make sure that no coarse dirt or debris is/
gets trapped in the bottom of the Multi Floor XXL Electrobrush or in
the bottom of the Electro Compact handheld brush (supplied de-
pending on model).
Store the vacuum cleaner and all accessories at an ambient tem-
perature between 0 °C and 45 °C.
While the vacuum cleaner is under warranty, repairs should only
be undertaken by a Miele authorised service technician. Otherwise
the warranty will be invalidated.
Warning and Safety instructions
7
Advertisement
Table of Contents
