Table of Contents
Advertisement
Using the supplied accessories
Battery charger cradle (HX LS)
(depending on model)
Before charging for the first time, you
must read the information in "Installa-
tion and connection – General battery
information".
When charging the battery for the first
time, you must use the PowerUnit. As of
the second charging operation, you can
use the battery charger cradle instead.
Push the battery into the charger
cradle until it audibly clicks into place.
Insert the plug into a power socket.
The charging process will start. The
battery charging state indicator flashes
on the left.
You can find out more about the battery
charging state indicator in "Installation
and connection – Battery charging state
indicator".
30
If you place the run-down battery in
the charger cradle straight after use, it
will only start charging once the bat-
tery has cooled down.
The cooling process can take up to
60 minutes. The battery charging state
indicator on the charger cradle will not
respond during this time.
Advertisement
Table of Contents
