Replace The Fuser - Oki C8800 User Manual

Replace the Fuser _______________________

WARNING! If the printer has been powered on, the fuser is
HOT. This area is clearly labelled. Do not touch it.
Handle the fuser with extreme care. Hold it only by its handle,
which is only mildly warm to the touch.
If in doubt, switch the printer off. Wait at least 10 minutes for
the fuser to cool before opening the printer cover.
1. Press the cover release (1). Fully open the printer's top
cover (2).
Fig1_001.eps
1
C8800 User's Guide
79
2