Select Printouts And Watermark On Receipt; For Australian Gst - Casio SE-S300 User Manual

Getting Started

9. Select printouts and watermark on receipt.

Turn the mode switch to "PGM", enter <0>, <1> or <10>, and press the <CH> , <ST>
Example: issue receipt (with no watermark)
issue receipt (with watermark)
print journal
Note !
If you need journal and are sometimes required receipts by customers, select "issue receipt".
After business hours, issue the electronic journal report.

10. For Australian GST

1. Turn mode switch to X mode.
2. Enter 01012001, press <ST>.
3. Press <CA>. (If you want to cancel this procedure, press <ST> instead of <CA>.)
X
REG
OFF
RF
PGM
Mode Switch
After completion of this procedure, the "GST system was changed" message was printed on receipt and;
1 Tax symbol (*) is printed.
2 Taxable amount is skipped.
3 "GST INCLUDED" is set to the TX1 descriptor.
4 "TAXABLE AMT" is set to the TA1 descriptor.
5 Total line is printed even in direct (cash) sale.
6 Australian rounding is set.
7 "$" is set to the monetary symbol.
8 Print "MOF message" on receipt.
9 Tax (10% tax rate, add-in tax, fraction round off) is set to the tax table 1.
No data is set to other tax tables.
0 The taxable amount and tax amount except TA1/TX1 are not printed on report.
A Restriction (to 0, 5) on last amount digit of cash sales, received on account, paid out,
and money declaration.
NOTE:
After completion of register programming, enter
(PGM mode
(This opration takes about 30 seconds.)
16
E
Z
X2/Z2
6
01012001
7s) to backup the program data into the internal non-volatile memory.
2
0hs
2
1hs
2
10hs
s 6 a
6200 and s in the PGM 7 mode