Nokia RM-10 User Manual page 90

Radio measurements — Enable or disable the radio
•
measurements.
To restore all settings to their original values, select
Options Restore defaults.
>
Security settings for wireless LAN access
points
WEP security settings
Select Menu Tools Settings
> >
points. Select Options New access
>
access point and Options > Edit.
In the access point settings, select
mode > WEP.
Wired equivalent privacy (WEP) encryption method
encrypts data before it is transmitted. Access to the
network is denied to users who do not have the
required WEP keys. When WEP security mode is in use,
if your device receives a data packet not encrypted with
the WEP keys, the data is discarded.
In an Ad-hoc network, all devices must use the same
WEP key.
Select from the following:
WEP key in use — Select the desired WEP key.
•
Authentication type — Select
•
WEP key settings — Edit the settings for the WEP key.
•
WEP key settings
Select Menu Tools Settings
> >
points. Select Options New access
>
access point and Options > Edit.
In the access point settings, select
mode
In an
WEP key.
Select
the following:
•
•
Connection Access
> >
point, or select an
•
802.1x security settings
WLAN security
Select
points. Select
access point and
In the access point settings, select
mode
802.1x
a wireless network, and prevents access if the
authorization process fails.
Select
•
Open or Shared.
•
Connection Access
> >
•
point, or select an
> WEP.
Ad-hoc network, all devices must use the same
WLAN security sett. WEP key settings
>
WEP encryption — Select the desired WEP encryption
key length.
WEP key format — Select whether you want to enter
the WEP key data in ASCII or
WEP key — Enter the WEP key data.
Menu Tools Settings
> >
Options New access
>
Options > Edit.
> 802.1x.
authenticates and authorizes devices to access
WLAN security sett.. and from the following:
WPA mode — Select EAP (Extensible Authentication
Protocol) or Pre-shared key
device identification).
EAP plug-in settings — If you selected
EAP, select which EAP plug-ins defined in your device
to use with the access point.
Pre-shared key — If you selected
shared key, enter the shared private key that
identifies your device to the wireless LAN to which
you connect.
WLAN security
and from
Hexadecimal format.
Connection Access
> >
point, or select an
WLAN security
(a secret key used for
WPA mode
>
WPA mode Pre-
>
91