VPN
VPN access points
To manage VPN access points, select
points
> Options, and from the following:
Edit
— Edit the selected access point. If the access
•
point is in use or its settings are protected, you
cannot edit it.
New access point
•
Delete
— Delete the selected access point.
•
VPN access point settings
Contact your service provider for the correct access
point settings.
To edit VPN access point settings, select the access point
and Options.
Select from the following:
Connection name
•
connection. The maximum length of the name is 30
characters.
VPN policy
— Select a VPN policy to be used with this
•
access point.
Internet access pt.
•
to be used with this VPN access point.
Proxy serv. address
•
of this VPN access point.
Proxy port number
•
port.
90
VPN
VPN access
>
— Create a new VPN access point.
— Enter a name for the VPN
— Select the Internet access point
— Enter the proxy server address
— Enter the number of the proxy
Wireless LAN
Select
Menu
Tools
Settings
>
>
LAN.
To have an indicator displayed when there is a wireless
LAN available in your current location, select
availability
> Yes.
To select the time interval for your device to scan for
available wireless LANs and update the indicator, select
Scan for
networks. This setting is not visible unless you
select
Show availability
> Yes.
Advanced WLAN settings
Select
Menu
Tools
Settings
>
>
LAN
Options
Advanced
settings. The wireless LAN
>
>
advanced settings are normally defined automatically,
and changing them is not recommended.
To edit the settings manually, select
config.
> Disabled, and define the following:
Long retry limit
— Enter the maximum number of
•
transmission attempts if the device does not receive
a receiving acknowledgement signal from the
network.
Short retry limit
— Enter the maximum number of
•
transmission attempts if the device does not receive
a clear-to-send signal from the network.
RTS threshold
— Select the data packet size at which
•
the wireless LAN access point device issues a request
to send before sending the packet.
TX power level
— Select the power level of your
•
device when sending data.
Connection
Wireless
>
>
Show
Connection
Wireless
>
>
Automatic