Tascam Mixcast 4 Quick Start Manual page 2

Gain adjustments have been added to achieve
suitable volume levels from USB, smartphone and
Bluetooth inputs.
The USB channel screen is used as an example. The smartphone (LINE IN)
and Bluetooth channels are the same.
Make these settings on the Level Screen.
USB input level
Adjust the connected device so that the volume is not too high or low
and the peak stays in the orange range on the level meter.
If the connected device cannot be adjusted to a suitable range, use this
slider to adjust it.
The Feedback Prevention function has been changed.
Make this setting on the Audio Settings Screen.
Feedback Prevention
Options: ON, OFF (default)
When this function is on, if the fader is raised for a mic that is not muted
(mute button off ), output from the MONITOR OUT and LINE OUT jacks
will be muted.
The mute icon will be shown on the Home Screen when this function is
muting output.
Mute icon
2
TASCAM Mixcast 4
Mixcast 4
A function has been added to show decibel meters for
monitoring suitable levels.
Open the Advanced Settings Screen from the Hardware Settings Screen
to make this setting.
Advanced Settings Screen
Decibel Meter
Options: ON, OFF (default)
Turn this function on to show decibel values on the meter scales of the
Home Screen.
This function can also be turned on/off by tapping the meter area on the
Home Screen.
Home Screen with decibel values shown
A shortcut function has been added that jumps to
settings screens by tapping channel numbers and
input icons on the Home Screen.
Tapping an input channel will open its settings screen.
NOTE
When recording, sound pad settings screens cannot be opened.