1. Manuals
  2. Brands
  3. Hyundai Manuals
  4. Chainsaw
  5. HTRT65-2C
  6. Original instructions manual

Hyundai HTRT65-2C Original Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

HTRT65-2C
1

Advertisement

Table of Contents
loading

Related Manuals for Hyundai HTRT65-2C

Summary of Contents for Hyundai HTRT65-2C

  • Page 1 HTRT65-2C...

  • Page 2: Table Of Contents

    CONTENTS SAFETY WARNINGS ..........................3 YOUR PRODUCT............................8 ASSEMBLY ............................10 FILLING THE OIL TANK AND FUEL TANK ....................13 OPERATION ............................15 MAINTENANCE AND STORAGE ......................17 DECLARATION OF CONFORMITY ......................21 WARRANTY ............................22 PRODUCT FAILURE ..........................23 WARRANTY EXCLUSIONS ........................

  • Page 3: Safety Warnings

    SAFETY WARNINGS  WARNING! When using this type of garden tool, basic precautions should always be followed to reduce the risk of fire, electric shock and injury.  Read all instructions carefully before attempting to use this product and retain these instructions. Be familiar with all the operations described in these operating instructions.
  • Page 4  Turn off the tool after use, when you leave it unattended, when changing these accessories and before servicing.  Keep handles dry, clean and free of oil and grease.  Be concentrated when using the tool. Look at what you do, use good sense and do not use the tool when you are tired.
  • Page 5 control.  Be careful when using the machine during stormy weather. Do not use the machine during lightning, thunderstorms or in bad weather. Do not expose the tool to rain.  Do not use the tool in damp environment.  It is recommended to use the spiked bumper provided for cutting trees and thick branches. ...
  • Page 6 can be controlled by the operator, if appropriate precautions are taken. Do not allow the chain saw to start. Do not stretch the arm too far and do not cut above the shoulder height. This helps prevent unintentional end contacts and allows better control of the chain saw in unforeseen situations. Use only the manufacturers specified replacement guides and chains.
  • Page 7 Wear protection gloves Wear anti slippery footwear Setting the chain tension Fuel filler (on fuel tank cap) oil filler (on oil tank cap) Choke knob...

  • Page 8: Your Product

    YOUR PRODUCT DESCRIPTION(FIG.1) (FIG.1) 1. Guide bar 7. Air filter cover 13. Throttle lock 2. Chain 8. Switch on/off 14. Primer 3. Chain tensioner screw 9. Oil tank cap 15. Bar cover nut 4. Chain brake 10. Starter cover 16. Engine switch 5.
  • Page 9 TECHNICAL DATA Model HTRT65-2C Type of engine T-1E65F (single cylinder, air cooled 2-stroke petrol engine) Fuel Tank Volume 550cm³ Ratio 40:1 Oil tank volume 260cm³ Idle speed of the engine 3000/min Clutch speed 4300/min Maximum power 2.9kW Displacement 65cm³ Maximum engine speed...

  • Page 10: Assembly

    ASSEMBLY Before you start up your chainsaw for the first time you must assemble the bar and chain, adjust the chain, fill the fuel tank with fuel and add oil to lubricate the chain. WARNING! Do not START the chain saw until it is completely set up for use. Read this manual carefully before using the machine.
  • Page 11 Fig. 5 Fig.6 6. Run the chain behind the drive chain wheel (E). Check if the chain links are well positioned between the teeth of the chain wheel (Fig. 7). 7. Insert the links into the bar groove (F) (Fig. 7). 8.
  • Page 12 Fig.10 Fig.9 CHAIN TENSION ADJUSTING PROCEDURE 1. Loosen the nuts (on the protective cover) and turn the adjusting screw (D) clockwise to tighten the chain. Turn the adjusting screw (D) counterclockwise to decrease chain tension. Make sure the chain is all the way around the bar (fig.

  • Page 13: Filling The Oil Tank And Fuel Tank

    3. Press the chain brake switch. The chain should stop quickly. Release the throttle key. WARNING! The brake shield must be in good condition and must make a distinctive click when moving from one position to another. Do not use the unit if the brake shield cannot be moved to one of the positions or if the chain does not stop when the brake is applied.
  • Page 14 TO FILL THE FUEL TANK WARNING: When filling the tank: The chainsaw must always be stopped and cooled. Never smoke during refueling. It must not have flames or sparks near the fuel. Before refueling, allow the chainsaw to cool completely. Do not attempt to refuel when the engine is hot. If fuel has been spilled, immediately stop refueling and do not start the engine.

  • Page 15: Operation

    OPERATION Before using the chainsaw, inspect the work area. This must be cleared. Remove any branches, obstacles and other items that may cause damage during cutting. The unit should always be filled with fuel and be usable. Check the level of filling and refill when necessary. STARTING THE ENGINE 1.
  • Page 16 CHECKING THE LUBRICATION OF THE CHAIN Before checking the oil, make sure that the bar and the chain are in place. Once the engine is started, turns it at medium speed and checks that the chain oil is sprayed and traces off the ground. The oil flow of the chain is adjustable to obtain the proper flow.

  • Page 17: Maintenance And Storage

    b. Trunk in elevation Begin by cutting a first part from below and then from above. Then, on the second part, repeat this operation. c. Pruning of a felled tree Observe first the direction of flexion of the branch. Make a first notch on the side in flexion and finish the cut on the opposite side.
  • Page 18 b. Cleaning the air filter Use a compressor to blow dust and chips. To clean the filter foam: open the air filter, remove the foam. Clean this foam with gasoline, wring out and dry. Replace the foam in the air filter and reassemble as described in the diagram. After 10 uses, replace the foam with a new one.
  • Page 19 f. Sprocket Check the sprocket on signs of wear. If wearing is important, replace it with a new one. Do not install a chain on a worn or damaged sprocket. Do not install a worn chain on a pinion. g. Spark plug Clean the electrodes with a wire brush and set the gap to 0.6mm if necessary.
  • Page 20 i. Sharpening of the chain For best performance, we strongly recommend that you periodically sharpen the chain. The chain can either be sharpened by a professional or by yourself by providing you with a sharpening guide (make sure you know how to use it). The chain must be sharpened when: Wood chips have become powder The cut is not straight...

  • Page 21: Declaration Of Conformity

    BUILDER SAS ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France Declares that the machinery designated below: Petrol chainsaw HTRT65-2C Serial number: 20220674299-20220674498 Complies with the provisions of the Directive "machinery" 2006/42/EC and regulations National transposing it; Also complies with the following European directives: EMC Directive 2014/30/EU Emission directive (EU) 2016/1628 &...

  • Page 22: Warranty

    WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor.

  • Page 23: Product Failure

    PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: • Empty the fuel tank. • Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine.

  • Page 24: Warranty Exclusions

    WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...

Table of Contents