Connect To Wi-Fi (Wireless Operation) - Philips 8000 Series User Manual

Tips
•
The Surround R/L should be within 6 m of
the Soundbar in an open area (the closer the
better).
•
Remove any objects between the Surround R/L
and the Soundbar.
•
If the wireless connection fails again, check if
there is a conflict or strong interference (e. g.
interference from an electronic device) around
the location. Remove these conflicts or strong
interferences and repeat the above procedures.
Connect to Wi-Fi (Wireless
Operation)
(For iOS and Android version)
By connecting this unit and mobile
phones, tablets (such as iPad, iPhone,
iPod touch, Android phones, etc.) to the
same Wi-Fi network, you can then use
the Google Home app to control the
soundbar.
1
Connect your phone or tablet to the
same Wi-Fi network that you want to
connect your soundbar
2
Download and install the latest
version of Google Home app on a
phone or tablet.
Make sure your router is turned on
•
and working properly.
3
Follow the instructions in the Google
Home App to connect this product
Philips Sound
to your Wi-Fi network (Philips
Devices
Set Up Play-Fi Device
Google Home
TAB8967SB-xxxx). If success, a sound
will be heard from the speaker.
4
After successful Wi-Fi connection,
the Wi-Fi light indicatar on the front
cabinet will stop pulsing and turn
solid. Once you set up this product
on your Wi-Fi network, you can
control it from any smartphone or
tablet on the same network.
5
After connection, you can change
the device name by Google Home
App. Otherwise, it follows the
default name.
6
If the ToU (Term of Use) is accepted,
after connection, this product may
perform a software update.
Upgrade to the latest software
when it is your first time set up.
The software upgrade may take
several minutes. Do not unplug your
speaker, turn off your device, or leave
the network during the update.
AirPlay 2 setup
To stream using AirPlay 2, connect the
soundbar to the same network as the
Apple product.
1
On your iOS device, go to: Settings
> Wi-Fi > SET UP NEW AIRPLAY
SPEAKER [Philips TAB8967SB-xxxx]
2
Select the speaker, add it to wifi then
go next steps as prompt.
» Keep the wifi AP (e.g. dlink655) as
» After successful Wi-Fi connection,
Philips Sound
Set Up
same as the iOS device's.
the Wi-Fi light indicator on the
front cabinet will stop pulsing
and turn solid. Once you set
up this product on your Wi-Fi
network, you can control it from
supported devices on the same
network.
21 EN