Connect To Wi-Fi (Wireless Operation) - Philips Fidelio B95 User Manual

Note Note
• •
The subwoofer should be within 6 meters from The subwoofer should be within 6 meters from
the main unit in an open area (the closer the the main unit in an open area (the closer the
better). better).
• •
Remove any obstacles between the subwoofer Remove any obstacles between the subwoofer
and the main unit. and the main unit.
• •
If the wireless connection fails again, check if If the wireless connection fails again, check if
there is a con ict or strong interference (e.g. there is a con ict or strong interference (e.g.
interference from an electronic device) around interference from an electronic device) around
the location. Remove them and try again. the location. Remove them and try again.
• •
If the wireless dis-connection or pairing lasts for 1 If the wireless dis-connection or pairing lasts for 1
minute, the subwoofer automatically switches to minute, the subwoofer automatically switches to
standby and the LED on the subwoofer turns o . standby and the LED on the subwoofer turns o .
Connect to Wi-Fi Connect to Wi-Fi
(Wireless Operation) (Wireless Operation)
(For iOS and Android version) (For iOS and Android version)
By connecting this unit and mobile devices By connecting this unit and mobile devices
(such as iPad, iPhone, iPod touch, Android (such as iPad, iPhone, iPod touch, Android
phones, etc.) to the same Wi-Fi network, you phones, etc.) to the same Wi-Fi network, you
can then use the Philips Sound app powered can then use the Philips Sound app powered
by DTS Play-Fi to control the soundbar to by DTS Play-Fi to control the soundbar to
listen to audio les. listen to audio les.
1 1
Connect your phone or tablet to the Connect your phone or tablet to the
same Wi-Fi network that you want to same Wi-Fi network that you want to
connect your soundbar. connect your soundbar.
2 2 Download and install the Philips Sound Download and install the Philips Sound
app powered by DTS Play-Fi on your app powered by DTS Play-Fi on your
device. device.
* Make sure your router is turned on and * Make sure your router is turned on and
working properly. working properly.
3 3 Press and hold the (Wi-Fi) button Press and hold the (Wi-Fi) button
located on the back cabinet for 8 located on the back cabinet for 8
seconds to trigger the Wi-Fi connection. seconds to trigger the Wi-Fi connection.
» » Until the speaker makes a second tone Until the speaker makes a second tone
and then release the button. and then release the button.
4 4
Wait until the Wi-Fi LED indciator on Wait until the Wi-Fi LED indciator on
the front cabinet goes from a fast blink the front cabinet goes from a fast blink
to a slow pulse. When it begins to slow to a slow pulse. When it begins to slow
pulsing indicating that the speaker is pulsing indicating that the speaker is
entering the Wi-Fi setup mode. entering the Wi-Fi setup mode.
5 5 Launch the Philips Sound app powered by Launch the Philips Sound app powered by
DTS Play-Fi. Follow the instructions in the DTS Play-Fi. Follow the instructions in the
app to connect this product to your Wi-Fi app to connect this product to your Wi-Fi
network. network.
EN EN
10 10
» » If the connection succeeds, PLAY-FI If the connection succeeds, PLAY-FI
displays on the display panel. displays on the display panel.
Note Note
For iOS version only For iOS version only
Wi-Fi network used by iPhone should be Wi-Fi network used by iPhone should be
switched temporarily to Play-Fi device AP switched temporarily to Play-Fi device AP
and restart Philips Sound app to complete and restart Philips Sound app to complete
the product's Wi-Fi setup. See the steps the product's Wi-Fi setup. See the steps
below: below:
• •
Go to Settings. Go to Settings.
• •
Select the Play-Fi Select the Play-Fi
device in the Wi-Fi device in the Wi-Fi
setup. setup.
6 6 After successful Wi-Fi connection, After successful Wi-Fi connection,
the Wi-Fi LED indicator on the front the Wi-Fi LED indicator on the front
cabinet will stop pulsing and turn solid. cabinet will stop pulsing and turn solid.
Once you set up this product on your Once you set up this product on your
Wi-Fi network, you can control it from Wi-Fi network, you can control it from
any smartphone or tablet on the same any smartphone or tablet on the same
network. network.
» » When using the app to play music, the When using the app to play music, the
display panel will show PLAY-FI. display panel will show PLAY-FI.
7 7
After connection, you can change the After connection, you can change the
device name. There are several names device name. There are several names
to choose from or create your own by to choose from or create your own by
choosing Custom Name at the bottom choosing Custom Name at the bottom
of the name list. Otherwise, if follows the of the name list. Otherwise, if follows the
default name. default name.
• •
Select Wi-Fi setting. Select Wi-Fi setting.
• •
Return to Philips Return to Philips
Sound app to Sound app to
continue the setup. continue the setup.