Startup Settings; Bluetooth Settings - Kawai ES120 Owner's Manual

Adjustments & Settings

Startup Settings

▋ Settings stored in Startup Settings
• Sound settings • Metronome settings
• Basic Settings • Phones/Speaker Settings • Bluetooth settings
▋ Executing the Startup Settings
While the instrument is set to the desired settings, press and hold the [FUNCTION] button, then press A#7.
The LED indicator for the [FUNCTION] button will flash while storing Startup Settings.
The LED indicators will turn off when Startup Settings storing is complete.

Bluetooth Settings

Availability of Bluetooth function dependent on market location.
▋ Bluetooth types and connection methods
Type
Bluetooth MIDI
Bluetooth Audio
• For more detailed instructions regarding Bluetooth pairing, please refer to the supplementary Bluetooth® Connectivity
Guide manual, available from the Kawai Global website: https://www.kawai-global.com/support/manual/
• Only one smart device can be connected to the piano's Bluetooth MIDI or Bluetooth audio at a time.
• If pairing has been unsuccessful, press the [BLUETOOTH] button to stop the LED indicator flashing.
▋ Bluetooth On/Off setting
If the LED indicator for the [BLUETOOTH] button turns off when the button is pressed, Bluetooth is off. Press and hold the [BLUE-
TOOTH] button until the LED turns on to turn on Bluetooth.
If the LED indicator for the [BLUETOOTH] button turns on when the button is pressed, Bluetooth is on. Press and hold the [BLUE-
TOOTH] button until the LED turns off to turn off Bluetooth.
The default setting is Bluetooth on.
▋ Check Bluetooth smart device connection status
When the LED indicator for the [BLUETOOTH] button is turned on, a smart device is connected. When the LED indicator for the [BLUE-
TOOTH] button is turned off, a smart device is not connected.
▋ Adjusting the Bluetooth Audio Volume
This setting allows the volume of the Bluetooth Audio playback to be adjusted. After first adjusting the playback volume on the smart
device or using the instrument's [MASTER VOLUME] slider, this setting may be used to further adjust the playback volume.
Press and hold the [BLUETOOTH] button, then press the A0 key to decrease the Bluetooth Audio volume or the B0 key to increase the
volume.
The Bluetooth Audio volume can be adjusted in the range from -15 to +15. The default setting is 0.
26
• Reverb and Effects settings for each sound
Description
When using a smart device app that supports
Bluetooth MIDI, this function allows the instru-
ment to be controlled by an app, or send/receive
MIDI data wirelessly.
This function allows audio from the connected
smart device (such as songs, videos, etc.) to be
played through the instrument's speakers wire-
lessly.
• MIDI Settings
Connection method
Enable the smart device's Bluetooth function, launch an
app that supports Bluetooth MIDI, then select "ES120"
from the app's connection setting screen. The LED indi-
cator for the [BLUETOOTH] button will turn on when a
Bluetooth MIDI application is connected.
Enable the smart device's Bluetooth function, then se-
lect "ES120 Audio" from the device's Bluetooth connec-
tion setting screen. If not displayed, press and hold the
[BLUETOOTH] button until its LED indicator starts flash-
ing. The LED indicator for the [BLUETOOTH] button will
turn on when a smart device is successfully paired.
After pairing successfully, the instrument will automat-
ically reconnect to the smart device when the power is
turned on.