Dual - Kawai ES120 Owner's Manual

Adjustments & Settings

Dual

▋ Layering sounds from different SOUND buttons
1. Select the desired sound used for two SOUND button categories.
2. Press and hold the SOUND button, then press another SOUND button to layer two sounds together.
P11 Sounds
Example:
To layer "Upright Piano | Classic" and "Slow Strings":
1. Select "Upright Piano | Classic" for the [PIANO] button, and
"Slow Strings" for the [OTHERS] button.
2. Press and hold the [PIANO] button, then press the [OTHERS]
button.
• The combination can be changed by pressing and holding the
main SOUND button and pressing another SOUND button.
• Press one of the SOUND buttons to restore normal operation.
▋ Layering sounds from the same SOUND button
Press and hold the SOUND category button, and:
1. Press A#0.
2. Press the two keys that correspond to the two desired sounds.
P11 Sounds
Example:
To layer "Slow Strings" and "Wood Bass", press and hold the [OTHERS] button, and:
1. Press A#0.
2. Press A0 and E1.
• Press one of the SOUND buttons to restore normal operation.
▋ Adjusting the layered sound volume balance
Press and hold a SOUND button and press keys F#1 and G#1 to adjust the volume balance between two sounds.
Different SOUND buttons
Same SOUND button
Press and hold a SOUND button and press D#1 to reset the balance.
18
F#1
The volume of the sound assigned to the SOUND
button on the left increases.
The volume of the sound assigned to the lower
section increases.
"Upright Piano | Classic"
Hold
1
♯ ♯
A C
0 1
A0 B0 C1 D1 E1 F1 G1 A1 B1
Hold
2
G#1
The volume of the sound assigned to the SOUND
button on the right increases.
The volume of the sound assigned to the upper
section increases.
1
"Slow Strings"
2
♯ ♯
♯ ♯
D F G A
1 1 1 1
2