ZALMAN CNPS9500 User Manual page 5

1) Intel Dual Core Pentium / Pentium 4 - Socket 775
① ①
Install Clip
Refer to "How to Install the CNPS9500's Clip" on page 3 to correctly install the clip (S-Type,
CNPS9500.
② ②
Install Clip Support
Align the clip support for Socket 775 (
holes on the motherboard and fasten them together using the clip support fixing bolts (
The lever slot on the clip support (
lever when installing.
※
The backplate support on the backplate for Socket 775 (
Clip Support Fixing Bolt, ⑬
Clip Support for Socket 775, ⑭
Motherboard
Backplate for Socket 775, ⑮
Backplate Support
③ ③
Apply Thermal Grease
Clean off particles and residue from the top of
the CPU. Then spread the included thermal
②
grease ( ) thinly on top of the CPU.
④ ④
Place Cooler
⑧
Insert two bolts ( ) into holes on the clip (S-Type,
CNPS9500 at the center of the CPU. Fasten the bolts slightly at
first. Then, fasten the bolts in an alternating manner until the clip
⑥
( ) is completely pressed against the clip supports.
※
Caution
When installing CNPS9500 on a motherboard with horizontally-oriented
retention guide, take extra care not to let the screwdriver exert excessive
force on the fan.
If excessive force is exerted on the fan, it may cause a malfunction.
⑤ ⑤
Connect Power (Use FAN MATE 2)
◆
Please refer to FAN MATE 2 installation and usage on page 7.
The specifications of any product may change without prior notice to improve performance.
※
All manuals and user guides at all-guides.com
⑭
) and the backplate for Socket 775 (
⑭
) should be properly oriented on the hinged side of the socket
Bolt, ⑧
Clip(S-Type), ⑥
⑮
) can be removed if deemed unnecessary.
CPU CPU
Socket Lever Hinge
Socket Lever
Socket Slot
Thermal Grease
CPU (IHS)
⑥
) and place
⑫
) on
⑮
) with the mounting
CPU
⑬
).
CPU
4