First Steps; Choosing A Language; Safety Precautions; Set Time - Nextar X3E Software Instruction Manual

FIRST STEPS

Please make sure that the battery of your device is fully charged.
•
Switch on the unit and tap on NAVI or NAVIGATION in the first screen.

Choosing a language

If more than one language is available on your device, you are prompted to choose
your language.
•
Click on the flag representing your country/language.
•
On the following screen, choose the voice skins used for the voice
commands during navigation (e.g. female or male voice).

Safety precautions

Next, a screen with safety precautions will be shown.
•
Read those safety precautions.
•
Mark the Hide at startup checkbox to hide these notes for future
start-ups.
•
Press the forward arrow.

Set time

Your PND is able to automatically determine the time through the GPS signal. For this
purpose, you need to set your time zone.
•
Choose your time zone from the list. You can later change this (see page
27).
•
During Summer Time, please mark the corresponding check box in order to
adjust the time shown forward by one hour.
Press the confirmation icon.
© gate5 AG, 2006. All rights reserved.
6
FIRST STEPS