6. Press the up/down key to select the desired maximum density setting for
this modality.
7. Press the Confirm key to store the data, or the Escape key to quit the
procedure without any changes.
Related Links
Controlling the printer via a remote PC (with browser)
Accessing the Change settings menu
Removing a modality
Adding a modality
Dry 2.4M | Advanced Operation (key-operator mode) | 45
Note: The maximum density will be limited to the maximum
density of the media.
on page 23
on page 34
on page 34
on page 82
2653B EN 20210520 0952