Checking Error Messages - AGFA Dry 2.4M Reference Manual

108 | Dry 2.4M | Problem solving

Checking error messages

If the printer is not printing your job, you should check the front panel display
to see if the printer is indicating an error status.
The operator is notified of the situation by means of an Error screen and a
beep:
• If the printer can identify a module as the source of the error, the
following message will be displayed (example):
• If the printer cannot identify the source of the error, the following message
will be displayed (example):
1. Acknowledge the new error condition.
2. Contact your local service organization.
2653B EN 20210520 0952