Operating Instructions - Westinghouse WSFTBJY39 Instruction Manual

WARNING: Do not expose the infrared sensor to direct sunlight or
other strong light, such as a florescent light.

OPERATING INSTRUCTIONS

NOTE: The remote control buttons are the same as the control
panel buttons.
1. Place the fan on a dry, level and stable surface.
2. Insert the plug into a 120 V AC / 60 Hz outlet. The screen will
display the current room temperature. If no button is pressed,
the display backlight will turn off after 5 minutes.
3. Press the POWER button to turn on all 3 fans at high speed.
4. Press the SPEED button repeatedly to select the fan speed.
Icon
NOTE: You cannot select a different speed level for each individual
fan. You can only change the speed of all 3 fans at the same time.
5. Press the MODE button repeatedly to select one of the
following options:
Icon
WSFTBJY39_Tower Fan_2L.indd 11 WSFTBJY39_Tower Fan_2L.indd 11
HOW TO USE
Speed level
Low
Medium
High
Mode
Normal
Natural – the fan cycles through the 3 speed levels:
Low > medium > high > medium > low etc.
Sleep – the fan gradually reduces the speed level
every 30 minutes until it reaches the low speed. Then
the fan will stay in low speed until it is turned off.
EN
11
11/2/2021 1:13:10 PM 11/2/2021 1:13:10 PM