Table of Contents
Advertisement
Power off and on the main unit to reboot the system.
12.
After one reboot, the main menu will appear on the management PC's screen, on which you
can perform hardware setup and run utilities.
If the configuration information (CSL_LESS.CFG) in the FD has already been
TIPS:
loaded, the main menu will appear without a reboot.
IMPORTANT:
specify "Onboard COM B" to [SerialPort Address] from BIOS setup utility's [System
Hardware]→[Console Redirection] menu. For details, see "SYSTEM BIOS ~SETUP~"
in Chapter 4.
If you use other tools, exit NEC EXPRESSBUILDER and power off/on the main unit.
13.
IMPORTANT:
[Disconnect] on the [MWA Remote Console] window.
For setting up MWA using Console Redirection (via WAN or direct),
After completing the procedure for remote console connection, click
Installing and Using Utilities
5-79
Advertisement
Table of Contents
