Virtual Sop - NEC 5020M-16 Operation Manual

Base Module
2.4.4.

Virtual SOP

If Virtual SOP (Virtual System Operator Panel) is chosen from the Main Menu, Virtual SOP
appears on the console screen. Virtual SOP periodically lists outlined status information of all
the existing partitions.
To return from Virtual SOP to Main Menu, enter "^B" (press the B key while holding down the
CTRL key).
Virtual SOP is selectable only if the iSP is assigned as the master.
(Screen Example)
iSP MAIN MENU
0) OS(BIOS) serial console of partition#0 (INITIALIZING
1) OS(BIOS) serial console of partition#1 (RUNNING
2) OS(BIOS) serial console of partition#2 (STOPPED
:
:
7) OS(BIOS) serial console of partition#7 (NOT CONFIGURED )
V) Virtual System Operator Panel
S) iSP commands
E) Exit
DISCONNECTALL) disconnect all console connections
<ENTER>
iSPyz> V
----- Virtual System Operator Panel ---------- 01/31/2005,19:30:20 -----
00 0 HW INITIALIZING yyyyyy
BIOS messages
SP messages
00 2 STOPPED
BIOS messages
SP messages
00 4 POWER OFF
BIOS messages
SP messages
00 6 NOT CONFIGURED
BIOS messages
SP messages
----- Enter CTRL+B to quit ---------------------------------------------
:
<CTRL>+<B>
855-900549
00 1 RUNNING
BIOS messages
SP
yyyyyy 00 3 FAULT
BIOS messages
SP
yyyyyy 00 5 RUNNING
BIOS messages
SP
yyyyyy 00 7 NOT CONFIGURED
BIOS messages
SP
2-24
)
)
)
yyyyyy
messages
yyyyyy
messages
yyyyyy
messages
yyyyyy
messages
Description
No.
(a)
(b)
(c)
(d)