Software Line Appearance (Virtual Extensions) - NEC NEAX2000 IVS2 General Description Manual

Chapter 5 Feature Description
Room Status
Route Advance
Save and Repeat
Security Alarm
Set Relocation
Single Digit Dialing

Software Line Appearance (Virtual Extensions)

2
NEAX2000 IVS General Description
NDA-24293, Issue 2
This feature provides the Hotel/Motel (H/M) Front Desk Instrument with a visual
display of the guest's room status. A supplementary print out (individual and
summary) can be provided.
This feature automatically routes outgoing calls over alternate facilities when the first
choice trunk group is busy. Users select the first choice route by dialing the
corresponding access code, and the equipment then advances through alternate trunk
groups only if the first choice is busy.
This feature allows a Multiline Terminal to save a specific dialed number and then
redial that number at a later time.
This feature provides an indication on the Attendant Console when a contact closure
occurs.
This feature enables two stations to be moved from one location to another without
reprogramming station data at MAT.
This feature provides the station user the ability to dial single digit codes to access
certain features while still allowing the same digit dialed to be used as the first digit of
guest room station numbers.
This feature permits assignment of circuits which do not physically exist, to be used as
secondary extensions on Multiline Terminals. There are 256 software lines that can be
assigned to line keys and used as desired.
Room Status
Page 67