Turning On The Projector - NEC M230X User Manual

 Turning on the Projector

1. Uncover the lens by sliding the lens cover (M350X/
M300X/M260X/M230X/M300W/M260W/M420X/M420XV)
or removing the lens cap (M350XS/M300XS/M260XS/
M300WS/M260WS)
[M350XS/M300XS/M260XS/M300WS/M260WS]
• Do not remove the lens cap by pulling on the string.
Doing so can cause mechanical damage to the part
around the lens.
2. Press the (POWER) button on the projector cabinet
or the POWER ON button on the remote control.
The POWER indicator will turn to blue and the projector
will become ready to use.
TIP:
• When the message "Projector is locked! Enter your password."
is displayed, it means that the [SECURITY] feature is turned on.
(→ page 32)
After you turn on your projector, ensure that the computer
or video source is turned on and that the lens cover is
open.
NOTE: When no input signal is present, the no-signal guidance is
displayed (factory menu setting).
2. Projecting an Image (Basic Operation)
Lens cover
Standby
Steady orange light
(→ page 127)
16
Lens cap
Blinking Power On
Blinking blue light Steady blue light