Menu Descriptions & Functions [Info.]; [Usage Time] - NEC M230X User Manual

 Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has six pages. The information included is as
follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.

[USAGE TIME]

[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE
REMAINING bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on.
• The message to the effect that the lamp or the filters should be replaced will be displayed for one minute when
the projector is turned on and when the POWER button on the projector or the remote control is pressed.
To dismiss this message, press any button on the projector or the remote control.
Lamp life(H)
ECO MODE
NORMAL
(OFF or AUTO ECO)
3000
4000
5000
* [ECO2] is available on M300X, M260X, and M260XS only.
• [TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving cal-
culation is based on the OECD (2008 Edition). (→ page 31)
Replacement lamp
ECO
(ECO1 or ECO2*)
3500
5000
6000
NP17LP M420X, M420XV, M350XS, M300WS
NP16LP M350X, M300W, M300XS, M260WS
M300X, M260X, M230X, M260W,
NP15LP
M260XS
94
5. Using On-Screen Menu
Model