Gray Level Settings (Gray Level) - NEC PlasmaSync 42PD3 User Manual

Gray Level Settings (GRAY LEVEL)

In [NORMAL] and other modes, this adjusts the brightness of non-image portions that appear at top, bottom, left, or right of the screen.
Set [OSD MODE] to [PRO] on the configuration menu, then perform the following operations.
* Gray level settings cannot be made in 4-screen or 9-screen systems.
Preparation Press the PROCEED button to display the main
menu.
Align the cursor with
1
Move the cursor left and right with
the POSITION/CONTROL
buttons.
Align the cursor with the desired item
2
Move the cursor up and down with
the POSITION/CONTROL LM
buttons.
Set the gray level with the POSITION/
3
CONTROL
[1] : Black
[2] : Gray
[3] : Light gray
Press the EXIT button 2 times
4
Press the EXIT button one time to return to the main menu.
One further press removes the menu.
* Aligning the cursor with [ALL RESET] and pressing the PRO-
CEED button will return all long life settings to the default
settings.
46
P M
LASMA ONITOR
†
LONG LIFE MODE
LUM. LIMIT
ORBITTING
INV / WT
PROG. ORBIT . . . . . . . .
GRAY LEVEL
ALL RESET
LONG LIFE MODE
LUM. LIMIT
ORBITTING
INV / WT
PROG. ORBIT . . . . . . . .
GRAY LEVEL
ALL RESET
buttons
Long Life Settings (LONG LIFE MODE)
Important
I Gray Level Settings
The gray level can be set to suit the level of gray brightness desired by the
user.
There are marked differences in brightness between the display portions
: OFF
: OFF
and non-display portions (where there is no image) in [NORMAL] mode
: OFF
which result in image burn-in due to strong contrast. In view of this, the
following settings are strongly recommended.
: 3
Note that image burn-in will still occur, though somewhat later, even after
making these settings and that burn-in cannot be suppressed. The moni-
tor should be used in [FULL] mode as much as possible.
1. Perform gray level settings to narrow the differences in brightness be-
tween display and non-display portions of the image.
2. Weaken the image adjustment contrast and brightness. (See P.28)
3. Perform the Long Life settings. (P.45)
: OFF
: OFF
: OFF
: 3