Table of Contents
Advertisement
POWER OFF
POWER ON
RGB 2/DVD/HD
RGB 1
RGB 3
VIDEO
EXIT
PROCEED
POSITION/CONTROL
RP-102
Main menu
The main menu comprises 2 pages (screens). Place the cursor on
icon
or
and use the POSITION/CONTROL
change the page. (Set [OSD MODE] to [PRO] on the configuration
menu before performing other operations.)
VOLUME
BALANCE
MUTE
: OFF
INPUT1
: VIDEO
INPUT2
: RGB1
SOURCE INFO.
RGB1
H-FREQ.
31.5kHz
V-FREQ.
60.0Hz
H-POL.
NEG
V-POL.
POS
Buttons Used in Menu Operations
Perform operations with the remote control and main unit operation buttons.
G PROCEED button
Displays the main menu.
Determine the selection or set details in the main
menu and proceed to the next step.
G EXIT button
Turns off the main menu.
Press during display of the sub menu to return
to the main menu.
NOTE:
CONFIG MENU
Among the various on-screen menus (OSM), only the CONFIG MENU is displayed by pressing and holding the main unit
POSITION/CONTROL L button and the PROCEED button simultaneously for 3 seconds or longer.
The menu screen of the CONFIG MENU does not contain icons that indicate menu items; however, operation is the same as
with other screens.
Operation of the Menu Screen
/
button to
G Items of the main menu
are displayed as icons.
See Pages 23 and 24 for
details.
G Displays the next page.
G Place the cursor here
and press the
button
to display the next page.
G Items of the main menu
are displayed as icons.
See Pages 23 and 24 for
details.
G Displays the previous
page.
G POSITION/CONTROL buttons
L button: Moves the cursor up.
M button: Moves the cursor down.
button: Moves the cursor left.
Press during display of the sub menu (set-
ting/adjustment screen) to select setting items
and also to decrease the adjustment value.
button: Moves the cursor right.
Press during display of the sub menu (set-
ting/adjustment screen) to select setting items
and also to increase the adjustment value.
Sub menu
BRIGHTNESS
CONTRAST
SHARPNESS
COLOR
TINT
NOTE:
Auto Memory
The setting value is automatically stored after the adjustment. Note that
setting values will not be automatically stored in the following circumstances.
* The power cable is disconnected from the outlet during the setting.
* There is a power outage during the setting.
Menu Operations
G Cursor
G Indication of the
adjustment value.
P
M
LASMA
ONITOR
†
25
Advertisement
Table of Contents
