Reassembling Procedures - Toshiba F Series Service Manual

7.2. Reassembling Procedures

Step
1
2
3
4
5
6
7
Photo Description
Fix the P.C. Board to
two frames.
Tighten two screws to fix
the frame.
Insert the HDD cable
and push the lock lever
toward the P.C. Board to
lock it.
Push the HDD in the
direction indicated by
the arrow and place it
inside the frame.
Install the cross key.
Insert the cross key into
the connector CN3 and
push the lock lever
toward the P.C. Board to
lock it.
Insert the cable from the
side panel SW into the
connector CN4 and
push the lock lever
toward the P.C. Board to
lock it.
42
Note
Tighten six screws.
Confirm that the lock
lever is lifted up.
Confirm that the lock
lever is lifted up and
released before
attachment.
Confirm that the lock
lever is lifted up and
released before
attachment.
Tool
Phillips
screwdriver
Screwdriver
Flathead
screwdriver
Flathead
screwdriver