US Robotics MAXg User Manual page 49

Wireless MAXg Access Point User Guide
You can click Allow Current Clients button to grant access to all wireless clients that are
currently connected to the access point, or you can apply one of the following filters to
determine which clients are allowed access:
Allow all wireless devices: Any wireless client that has the correct security
information will be allowed to connect to the access point. This is the default setting.
Allow only these devices: Allows only devices with specific MAC addresses to
establish a wireless connection with the access point.
1. Enter the MAC address of the device that should be allowed connection to the
access point.
2. Click Add.
Deny only these devices: Denies a wireless connection to the access point for
devices with the specified MAC addresses. This can be used if you notice unauthorised
wireless devices that are connected to your network.
1. Enter the MAC address of the device that should be denied connection to the
access point.
2. Click Add.
file:///G|/CSO/T-Writer%20Repository/Networking/5455%20MAXg%20CR%20AP/Regulatory%20Preview/security.html (7 of 8)4/24/2007 5:15:53 PM