Siemens KI N Series User Manual page 50

en Troubleshooting
Fault
The temperature dis-
play (freezer compart-
ment) flashes.
A warning tone
sounds, the temperat-
ure display (freezer
compartment) flashes
and lights up.
The temperature dif-
fers greatly from the
setting.
The base of the refri-
gerator compartment
is wet.
The appliance hums,
bubbles, buzzes,
gargles, clicks or
crackles.
50
Cause and troubleshooting
The temperature in the freezer compartment was too
warm.
Press .
1.
a The temperature display (freezer compartment)
briefly indicates the warmest temperature reached
in the freezer compartment. The temperature dis-
play (freezer compartment) then indicates the set
temperature again.
Press .
2.
a The temperature display (freezer compartment) no
longer flashes.
Different causes are possible.
Press .
▶
a The alarm is switched off.
The appliance door is open.
Close the appliance door.
▶
External ventilation openings are covered up.
Remove any obstructions from in front of the ex-
▶
ternal ventilation openings.
Larger quantities of fresh food have been put in.
Do not exceed the max. freezing capacity.
▶
→ "Freezing capacity", Page 45
Different causes are possible.
Switch off the appliance. → Page 42
1.
Switch the appliance back on after five minutes.
2.
→ Page 41
If the temperature is too warm, check the temper-
‒
ature again after a couple of hours.
If the temperature is too cold, check the temper-
‒
ature again on the following day.
The condensation channel or drainage hole are
blocked.
Clean the condensation channel and the drainage
▶
hole. → Page 48
Not a fault. A motor is running, e.g. refrigerating unit,
fan. Refrigerant flows through the pipes. The motor,
switches or solenoid valves are switching on or off.
Automatic defrosting is running.
No action required.