Utility Connections; Remote Control (Db-9M); Console (Rj-11 Async-Serial Port) - Comtech EF Data CDD-562L Installation And Operation Manual

CDD-562L/564 Demodulator with IP Module
Rear Panel Connections
3.2.3

Utility Connections

3.2.3.1

Remote Control (DB-9M)

THIS CONNECTOR IS NOT A STANDARD EIA-232 INTERFACE.
INTENDED FOR CUSTOMER USE. IT IS INTENDED FOR FACTORY TEST USE
ONLY.
EQUIPMENT TO THIS INTERFACE.
Note the following:
Pin # Description
1 Ground
6 Selected Demod RS-422 Rx Data +
2 EIA-232 Transmit Data (38.4k, 8N1 fixed)
7 Selected Demod RS-422 Rx Data -
3 EIA-232 Receive Data (38.4k, 8N1 fixed)
8 Selected Demod RS-422 Tx Clock +
4 Selected Demod I-Channel monitor
9 Selected Demod RS-422 Tx Clock -
5 Selected Demod Q-Channel monitor
3.2.3.2

Console (RJ-11 Async-Serial Port)

Note the following:
Pin #
1
2
3
4
5
6
CONTACT CEFD CUSTOMER SUPPORT PRIOR TO CONNECTING ANY
The Remote Control interface is a 9-pin Type 'D' male (DB-9M) connector,
reserved for use in in-factory test applications.
The Console port is a standard 6-pin RJ-11 modular jack. The Async-Serial
EIA-232 DCE Console services the IP Module Command Line Interface
(CLI). The supplied adapter cable connects the user PC to the Console port. A
user-supplied terminal emulator program such as HyperTerminal or Tera Term
is used for management of demodulator and IP Module functions.
Function
Ground
Rx
Tx
Ground
Not used
Not used
Direction
--
In
Out
In
In
Out
Out
Out
Out
3–5
Revision 2
MN/CDD564L.IOM
IT IS NOT