Running A Program; Deleting A Program - Casio fx-50F User Manual

6. After inputting the program, press A or !
• To run the program you just created, press w here to display the RUN Program
screen. For more information, see "Running a Program" below.
• To return to the normal calculation screen, press ,b to enter the COMP Mode.
A Editing an Existing Program
1. Press ,g (PRGM) b (EDIT) to display the EDIT Program screen.
2. Use number keys b through e to select the program area that contains the program
you want to edit.
3. Use and
operations to edit the contents of the program or to add new contents.
• Pressing jumps to the beginning of the program, while
4. After you fi nish editing the program, press A or !
k Running a Program
You can run a program in the PRGM Mode or from another mode.
A Running a Program from Outside the PRGM Mode
1. Press .
2. Use number keys b through e to select a program area and execute its program.
A Running a Program in the PRGM Mode
1. Press ,g (PRGM) to display the PRGM Mode initial screen.
2. Press c (RUN).
• This will display the RUN Program screen.
RUN Pr o RUN Pr o r am r am
g g
P-1234 670 P-1234 670
3. Use number keys b through e to select the program area that contains the program
you want to run.
• This will execute the program in the program area you select.
A What to do if an error message appears
Press or . This will display the editing screen for the program, with the cursor located
at the location where the error was generated so you can correct the problem.
k Deleting a Program
You can delete an existing program by specifying its program area number.
A Deleting the Program in a Specifi c Program Area
1. Press ,g (PRGM) to display the PRGM Mode initial screen.
to move the cursor around the program, and perform the required
Program areas that already contain program data (P1 through P4)
Remaining program memory capacity
(EXIT).
(EXIT).
E-64
jumps to the end.
P1 P2 P3 P4 P1 P2 P3 P4
1 2 3 4 1 2 3 4