Using Program To Send Program Data - Casio fx-7700GE Service Manual

4-5. USING PROGRAM TO SEND PROGRAM DATA

The following procedures show how to send program data from one fx-7700GE unit to another. You can
specify one specific program or all programs for the communication operation.
•
To send all PROGRAM data
Send Unit
Starting from the LINK Mode, press
the send mode.
Move the pointer to Program, and press
specify it as the data type.
EXE
= = TRANSMIT = =
PROGRAM
ALL ONE
F1 F2
•
To back up all data
Send Unit
Starting from the LINK Mode, press
the send mode.
Move the pointer to Back Up, and press
specify it as the data type.
= = TRANSMIT = =
BACK UP
EXE
YES
F1
Press (YES) to start the send operation, or
F1
(NO) to abort without sending anything.
F6
(YES)
F1
= = TRANSMITTING = =
BACK UP
TO STOP : [ AC ]
* Pressing interrupts the send operation and
AC
returns to the LINK Mode.
(TRN) to enter Starting from the LINK Mode, press
F1
enter the receive mode.
to Move the pointer to Program, and press
EXE
specify it as the data type.
EXE
(TRN) to enter Starting from the LINK Mode, press
F1
enter the receive mode.
to Move the pointer to Back Up, and press
EXE
specify it as the data type.
EXE
NO
F6
Press
(NO) to abort without receiving anything.
F6
F1
*Pressing
returns to the LINK Mode.
— 15 —
Receive Unit
= = RECEIVE = =
PROGRAM
ALL ONE
F1 F2
Receive Unit
= = RECEIVE = =
BACK UP
YES
F1
(YES) to start the send operation, or
F1
(YES)
= = RECEIVING = =
BACK UP
TO STOP : [ AC ]
interrupts the receive operation and
AC
(RCV) to
F2
to
EXE
(RCV) to
F2
to
EXE
NO
F6