Bluetooth - Panasonic FZ-S1 Series Operating Instructions Manual

Bluetooth

You can use the unit to connect to other Bluetooth-compatible devices.
Note
•
The Bluetooth antenna is contained in the gray area indicated in the illustration below. Covering the
area around the antenna with your hand may affect the signal quality.
Turning Bluetooth on and off
1.
From the home screen, tap
® [Bluetooth].
2.
Tap the switch to turn Bluetooth on or off.
Pairing a Bluetooth device
Use this procedure to use the unit to initiate the pairing process, such as when pairing a Bluetooth headset.
•
Make sure that Bluetooth is turned on, and set the other Bluetooth device to pairing mode or discoverable
mode. (Refer to the instruction manuals included with the other device for details.)
1.
From the home screen, tap
® [Bluetooth] ® [Pair new device].
•
The unit searches for nearby Bluetooth devices, and the names of Bluetooth devices available for
pairing are displayed.
2.
Tap the name of the device that you want to pair with the unit.
3.
Follow the on-screen instructions.
Note
•
When the unit receives a connection request from the other Bluetooth device, a pairing request
screen is displayed. Follow the on-screen instructions.
Removing a paired Bluetooth device
1.
From the home screen, tap
•
Previously connected devices are shown under [PREVIOUSLY CONNECTED DEVICES].
2. ® [FORGET] of the paired device that you want to remove.
Tap
•
If you cannot find the device you want to remove, tap [See all].
[Settings] ® [Connected devices] ® [Connection preferences]
[Settings] ® [Connected devices] ® [Connection preferences]
[Settings] ® [Connected devices].
Operating Instructions - Reference Manual
Connectivity
27