Using The Bluetooth Function - Panasonic FZ-M1 Series User Manual

Bluetooth
<Only for model with Bluetooth>
You can access internet and other Bluetooth devices without connecting cables.
N O T E
Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or body.

To use Bluetooth, set

The transmission rate will be lower when a microwave oven is used near by.

When you uninstall the Bluetooth Driver, turn Bluetooth off.


Using the Bluetooth Function

Before using a Bluetooth, turn the Bluetooth communication on.
Turning on/off the Bluetooth communication
1. To enable the wireless communication (
2. Touch (Settings) - [Network & Internet] - [Airplane mode]
Alternatively, touch
3. To turn off the Bluetooth communications, set [Bluetooth] to [Off].
To turn on the Bluetooth communications, set [Bluetooth] to [On], and then;
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen
messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference.)
To check the Bluetooth communication status
1. Touch (Settings) - [Devices] - [Bluetooth].
Alternatively, touch
N O T E
You can also touching

check the communication status.
[Bluetooth] of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of the Setup Utility.
Disabling/Enabling Wireless
(Start) - (Settings) - [Network & Internet] - [Airplane mode]
(Start) - (Settings) - [Devices] - [Bluetooth] in the desktop mode.
on the task tray, and then touch
Communication).
to [Off].
*1
to [Off] in the desktop mode.
*1
(Bluetooth) - [Show Bluetooth Devices] to