Table of Contents
Advertisement
4
TV Operation and Features
Choosing a Viewing Source
Input Selection menu
Choose a viewing source from the Input Selection
menu. The current TV input appears as a full-color icon
in this menu.
1.
Press
INPUT to display the Input Selection menu. If
there are only two inputs to the TV, INPUT switches
between them without displaying the menu.
2.
Highlight an input icon using
3.
ENTER to switch to the input and close the
Press
menu.
More About the Input Selection Menu
•
To assign meaningful names to the icons, see the
Inputs > Name menu, page 50.
•
To rearrange the icons, see the Inputs > Order
menu, page 50.
TV Tips
Turning the TV On or Off
To turn the TV on or off, point the remote control at the
front of the TV and press the POWER button. Alterna-
tively, press the POWER button on the TV's control panel.
Controlling Sound Volume
•
Press
VOL
/
to adjust the sound level.
•
See also
"Controlling A/V Receiver Sound Volume" on
page 16.
Changing Channels (antenna sources)
To change channels:
•
Enter the channel number using the number keys
on the remote control and press ENTER. For a two-
Sleep Timer
The Sleep Timer turns the TV off after the length of time
you set. To set the TV to turn on at a certain time, see
the Setup > Timer menu on page 47.
Setting the Sleep Timer
1.
Press
2.
Press
30-minute increments up to the maximum of 120
minutes.
3.
Press
keys for the message to disappear.
4.
Press
sleep timer turns off the TV.
.
Cancelling the Sleep Timer
1.
Press
2.
Press
Note: After five seconds of inactivity, the message box
part digital channel, such as 3-1, press 3
to enter a dash (separator).
•
Press
channel at a time.
•
Press and hold
through channels.
•
Press
ously tuned channel.
•
Press
highlight a channel, and press ENTER.
•
Use the Fav (Favorites) feature to set up lists of
favorite channels and tune to them with the FAV key.
See Setup > Edit > Fav1–Fav6 on page 45.
NOTE: Perform channel memorization to make finding
SLEEP on the remote control.
SLEEP additional times to increase the time in
EXIT or wait five seconds without pressing any
SLEEP to view the time remaining before the
SLEEP to display the on-screen message.
SLEEP repeatedly until OFF is displayed.
will disappear.
CH/PAGE
/
to change channels one
CH/PAGE
/
QV (QuickView) to switch back to the previ-
GUIDE to display ChannelView channel listings,
channels easier. See Setup > Scan, page 44.
29
—
CANCEL 1
to move quickly
Advertisement
Table of Contents
