Table of Contents
Advertisement
gf42
Manual Robin SV ENG - v. 3.1.0
5
5.2.3.6 Video / Motion
Motion allows you to select parts of the video image where you want to detect movement.
Detection of movement can trigger 'Actions' such as acoustic signals, switching a built-in relay or
initiating a call to a phone set. The actions are set in -System-Events-.
Use the mouse to define and drag a selection area in the image. Draw a frame in the video image
and enlarge/reduce it by dragging the top left and bottom right corners. The red cross at the top
removes the selection frame.
Consider how to minimise the chance of a false alarm when selecting the zones. For example, avoid
objects that move in the wind such as flags, branches on trees, etc.
Both detection sensitivity and the size of the object you want to detect can be adjusted. The graph
at the bottom of the image allows you to verify whether the settings are correct.
A green barcolour means no detection (motion below threshold), red means motion detected
exceeds threshold. The red line indicates the boundary of the detection area.
42
Advertisement
Table of Contents
