Advertisement
1. Programming the Broadband Module.
Before attempting to program IP extensions it is important that the following are
checked:
•
If any of the IP extensions are located remotely ensure that the broadband service
is connected to and working on the Broadband Module. The VoIP programming is not
available unless an IP address is provided on the WAN interface. This address is shown
on the status page. See the broadband module manual for more information.
•
The broadband service provides a static IP address.
•
If the IP extensions are located on the LAN only and no broadband service is sup-
ported then the VoIP interface must be changed to IP LAN. See the broadband
module manual for more information.
WARNING Your service provider MUST provide a static IP address for
IP phones to work remotely.
1. Connect to the Broadband Module programming Interface using the Wizard
or Browser Click VoIP from the Setup panel in the main Broadband Module
screen.
2
Mitel 5330 IP Phone
Quick Reference User Guide
Advertisement
