Cleaning And Servicing - Bosch MCM4 Series Operating Instruction

UniKlein_MCM4-GB_ms_zh-cn_zh-tw_en_ar.book Seite 9 Montag, 16. Juni 2014 10:16 10
Turn rotary switch to setting M and hold.

The longer the appliance remains
switched on, the finer the ingredients
are cut.
In the case of herbs the required cutting
result can be achieved very quickly after
switching the appliance on. A brief "tap"
on setting M may be adequate.
Guide values for maximum quantities and
processing times, see Fig. .
After using the appliance
Release rotary switch.

Remove mains plug.

Rotate universal cutter anti-clockwise and

remove.
Turn universal cutter over, the chopped

food falls into the lid.
Rotate jug anti-clockwise and remove.

Remove the rest of the chopped food

from the jug using a suitable implement
(e.g. spoon).
Clean all parts, see "Cleaning and

servicing".
Robert Bosch Hausgeräte GmbH

Cleaning and servicing

Risk of injury from sharp blades!
Do not touch universal cutter blade with
bare hands. Clean them with a brush.
Warning!
Do not use abrasive cleaning agents.
Surfaces may be damaged.
It is recommended to clean the universal cutter
immediately after use.
This will prevent residue from drying on and
attacking the plastic (e.g. by essential oils
in herbs).
The lid is dishwasher-proof.
Do not clean jug and drive in the dishwasher,
but under running water using a brush.
Do not leave in water!
To dry, place the jug and drive face up.
Subject to alterations.
en
9