Miele KM 93-2 Operating Instructions Manual page 25

Conversion to alternative types of gas
The cooktop is equipped for con-
nection to a Natural gas supply.
Conversion is only necessary when
using LPG gas (Propane).
Changing the main jets
Using a 10 mm wrench loosen the
main jets. Use a 13 mm wrench to
hold backup.
Screw in the new main jets, once
again using the 13 mm wrench to
hold backup.
Conversion to alternative types of gas
Changing the small jets
Using a small screwdriver, unscrew
the small jets next to the control
knob shafts.
Pull the jets out with a pair of pliers.
Select the required jets as shown in
the table, and install them in the
reverse order.
Follow the instructions included in
the cooktop box for changing the jet
it the main gas regulator.
25