Maintenance And Repairs; Disposal - Stihl HSE 61 Instruction Manual

14 Maintenance and Repairs

HSE 61
600 mm blade:
Handle, right:
HSE 71
600 mm blade:
Handle, left:
Handle, right:
HSE 71
700 mm blade:
Handle, left:
Handle, right:
HSE 81
500 mm blade:
Handle, left:
Handle, right:
HSE 81
600 mm blade:
Handle, left:
Handle, right:
HSE 81
700 mm blade:
Handle, left:
Handle, right:
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2
2.0 m/s for the vibration level.
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools.
Depending on the type of usage, the vibrations
that actually occur may differ from the values
quoted.
The vibration values quoted may be used for an
initial assessment of the user's exposure to
vibrations.
The actual exposure to vibrations has to be eval‐
uated. This process may also take into account
times during which the electric power tool is
switched off and times during which it is switched
on but running without load.
Observe measures to reduce vibration exposure
to protect the user – see section on "Vibrations"
in chapter on "Safety Precautions and Working
Techniques".
0458-279-9621-B
13.5
REACH is an EC regulation and stands for the
2
3.3 m/s
Registration, Evaluation, Authorization and
Restriction of Chemical substances.
For information on compliance with the REACH
2
3.8 m/s
regulation (EC) No. 1907/2006 see
2
2.6 m/s
www.stihl.com/reach
14 Maintenance and Repairs
2
3.8 m/s
2
2.6 m/s
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
2
3.2 m/s
2
2.1 m/s
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
2
3.5 m/s
2 courses and are supplied with the necessary
2.5 m/s
technical information.
When repairing the machine, only use replace‐
2
3.5 m/s ment parts which have been approved by STIHL
2
2.5 m/s
for this power tool or are technically identical.
Only use high-quality replacement parts in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).

15 Disposal

Contact the local authorities or your STIHL serv‐
icing dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
REACH
English
31