Maintenance And Care - Stihl HSE 61 Instruction Manual

English
NOTICE
Do not operate your machine with dull or dam‐
aged cutting blades. This may cause overload
and will give unsatisfactory cutting results.

10 Maintenance and Care

The following intervals apply for normal operating con‐
ditions. The specified intervals must be shortened
accordingly when working for longer than normal or
under difficult cutting conditions (extensive dust, etc.).
Complete machine
Two-hand control
Cool air intake port
Cutting blades
Gear assembly and con‐
necting rod
Carbon brushes
Accessible screws, nuts
and bolts
Safety information label
1)
STIHL recommends STIHL dealers
2)
Afterwards spray the blades with STIHL resin solvent
28
Visual inspection
Clean
Check function – the cut‐
ting blades must quickly
come to a standstill when
the trigger switch or
switch lever, or the trigger
switch, or auxiliary switch
is released
Visual inspection
Clean
Visual inspection
2)
Clean
1)2)
sharpen
Have replaced by servic‐
1)
ing dealer
inspection by a specialist
dealer after every 50
1)
hours of operation
Have gearbox topped up
with STIHL gear lubricant
1)
by servicing dealer
inspection by a specialist
dealer after every 100
1)
hours of operation
Have replaced by servic‐
1)
ing dealer
Tighten
replace
10 Maintenance and Care
X
X
X
X
X
X
X
X
X
X
X
X
X
0458-279-9621-B