Stihl HSE 61 Instruction Manual page 20

English
Never jerk the power cord to disconnect it from
the wall outlet. To unplug, grasp the plug, not the
cord.
Unsuitable extension cords may be dangerous.
When using extension cords, ensure that the
minimum conductor cross-sections are main‐
tained (refer to the chapter entitled "Connecting
the machine to the power supply").
The connector and coupling of the extension
cord must be waterproof or routed in such a way
that they cannot come into contact with water.
Only use cutting blades and accessories that are
explicitly approved for this power tool by STIHL
or are technically identical. If you have any ques‐
tions in this respect, consult your dealer. Use
only high quality parts and accessories. in order
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
tools and accessories. They are specifically
designed to match the product and meet your
performance requirements.
Never attempt to modify your power tool in any
way since this may increase the risk of personal
injury. STIHL excludes all liability for personal
injury and damage to property caused while
using unauthorized attachments.
Do not use a high-pressure washer to clean the
power tool. The solid jet of water may damage
parts of the unit.
Do not spray the power tool with water.
2.1 Clothing and equipment
Wear proper protective clothing and equipment.
Clothing must be sturdy but allow
complete freedom of movement.
Wear close-fitting clothes such as a
boiler suit, not a loose jacket.
Do not wear clothing which could become trap‐
ped in wood, brush or moving parts of the
machine. Do not wear a scarf, necktie or jewelry.
Tie up and confine long hair above your should‐
ers.
Wear sturdy shoes with non-slip
soles.
20
2 Safety Precautions and Working Techniques
2.1.1 Safety Glasses, Hearing Protection
WARNING
To reduce the risk of eye injuries,
wear close-fitting safety glasses in
accordance with European Standard
EN 166. Make sure the safety
glasses are a snug fit.
Wear "personal" sound protection, e.g. ear
defenders.
Wear sturdy protective gloves made
of a resistant material (e. g. leather).
STIHL can supply a comprehensive range of per‐
sonal protective equipment.
2.2 Transporting the machine
Always switch off the power tool, unplug it from
the power supply and fit the blade scabbard –
even when carrying the unit short distances.
Carry the power tool by the handle – cutting
blades behind you.
Transporting by vehicle: Properly secure the
power tool to prevent tipping over and damage.
2.3 Before Starting Work
Check that your power tool is properly assem‐
bled and in good condition – refer to appropriate
chapters in the User Manual:
0458-279-9621-B