Table of Contents
Advertisement
Starting the SiteProtector Console and logging on
Procedure
1. On your computer, open the SiteProtector Console.
2. Right-click the My Sites node in the left pane.
3. Select New → Site.
4. Log in using the SiteProtector SP1001 appliance's IP address that you entered
5. Do the following:
6. Click OK.
18
SiteProtector System: SP1001 Hardware Configuration
when you performed the procedure on 26.
In this Field...
User Name
Password
Note: Change this password as soon as possible. See "Securing SP1001
Appliance Passwords" on page 22.
Type the following...
Administrator
ISSADMIN
Advertisement
Table of Contents
