How To Use The Sp1001 Appliance Documentation - IBM Proventia Management SiteProtector SP1001 Hardware Configuration Manual

How to Use the SP1001 Appliance Documentation

This topic explains how the information in the SiteProtector SP1001 Hardware
Configuration Guide is organized and lists other documents in the SiteProtector
documentation suite that you may use to configure SiteProtector.
Document organization
This document is organized into logical units, as described in the following table:
The following table describes other documents in the SiteProtector documentation
suite:
viii
SiteProtector System: SP1001 Hardware Configuration
Chapter
Chapter 2, "Before You Begin," on page 7
Chapter 3, "Connecting and Configuring the
SiteProtector SP1001 Appliance," on page 11
Chapter 4, "Configuring the SiteProtector
Console," on page 19
Chapter 5, "Optional Configuration Tasks,"
on page 25
Document
SiteProtector SP1001 Getting Started Card
SiteProtector Configuration Guide
SiteProtector Policies and Responses
Configuration Guide
Description
Contains background information,
prerequisites, and procedures for configuring
the SiteProtector SP1001 appliance hardware.
Contains procedures for configuring the
SiteProtector SP1001 appliance hardware and
for accessing the SiteProtector software on
the SiteProtector SP1001 appliance from the
SiteProtector Console. To support less
experienced users, this chapter provides
significantly more background information
than the SiteProtector SP1001 Getting Started
Card.
Contains procedures for configuring the
SiteProtector SP1001 appliance
administration options using the
SiteProtector Console. If you configured the
SiteProtector SP1001 appliance hardware
using the SiteProtector SP1001 Getting Started
Card, start here to continue the configuration
process.
Contains procedures for optional hardware
and server administration tasks.
Content
Contains the minimal information required
to configure SiteProtector SP1001 appliance
hardware and to connect it to the Console. If
you are an experienced hardware
administrator and do not need significant
background information about the tasks that
you perform, consider using this card to
configure the SiteProtector SP1001 appliance
hardware.
Contains information about configuring,
updating, and maintaining the SiteProtector
security management software.
Contains information about configuring
policies and responses, including Central
Responses.