Swa1501 Specifications; Frequency Response; Dimensions - Mackie SWA1501 User Manual

SWA1501 SPECIFICATIONS

System Specifications
Frequency Range (–10 dB):
Frequency Response (–3 dB):
Maximum SPL @ 1m: 125 dB
Peak Output @ 1m:
Crossover Frequency: 120 Hz (12 dB/octave)
Input Type:
Input Impedance:
Input Protection:
Thermal Protection:
Transducer Specifications
Low-Frequency Transducer
Diameter:
Voice Coil Diameter:
Power Amplifier
Low-Frequency Power Amplifier
Rated Power
*:
Rated THD:
Cooling:
Line Input Power
US:
Recommended Amperage Service: 8 A
Europe:
Recommended Amperage Service: 4 A
Physical Properties
Height:
Width:
Depth:
Weight:

Frequency Response

110
100
90
80
70
60
50
40
20 100
10
36 Hz–120 Hz
47 Hz–120 Hz
128 dB
Balanced differential
50k ohms
Level protected
Input stage muting,
auto-reset
15˝ (380 mm)
3˝ (75 mm)
500 watts rms
< 0.03%
Passive
120 VAC, 60Hz
230 VAC, 50Hz
23.5˝ (597 mm)
17.2˝ (436 mm)
23.7˝ (603 mm)
88 lbs. (40 kg)
1000
Frequency (Hz)
Enclosure: 15 mm thick multi-layered baltic
birch wood
Enclosure Geometry:
Rectangular
Mounting Methods:
Floor mount only
WARNING: The cabinet has no rigging points and is not
suitable for rigging. NEVER attempt to suspend the SWA1501
by its handles.
* Rated power into loudspeaker's rated impedance.
Disclaimer
Since we are always striving to make our products
better by incorporating new and improved materials, compo-
nents, and manufacturing methods, we reserve the right to
change these specifications at any time without notice.
"Mackie" and the "Running Man" figure are regis-
tered trademarks of LOUD Technologies Inc.
All other brand names mentioned are trademarks or
registered trademarks of their respective holders, and are
hereby acknowledged.
©2004-2012 LOUD Technologies Inc.
All Rights Reserved.

Dimensions

17.2" (436 mm)
10.0"
(254 mm)
FRONT
17.2" (436 mm)
7.0"
(178
mm)
TOP
Fundamental
Second
Third
23.7" (603 mm)
5.0"
(127 mm)
6.0"
(152
mm)
7.0"
(178 mm)
SIDE
10000 20000