Appendix C: Technical Information; Mr10Smk3 Specifications - Mackie MR10Smk3 Owner's Manual

Appendix C: Technical Information

MR10Smk3 Specifications

Acoustic Performance
Free Field Frequency Response:
Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input:
Maximum SPL Per Pair:
Transducers
Low Frequency:
Amplifiers
Low Frequency Power:
Type:
Electronic Crossover
Crossover Type:
Crossover Frequency:
Sensitivity:
Input Impedance:
35 Hz – 180 Hz
113 dB SPL @ 1m
119 dB SPL @ 1m
10 in / 254 mm hyperbolic
curved cone woofer
120 watts, 4 Ω load,
240 watts peak
Monolithic IC, Class AB with
DMOS power stage
12 dB/octave
40 Hz – 180 Hz [Adjustable]
+4 dBu at 65 Hz for full output
20 kΩ, balanced bridging;
10 kΩ unbalanced
AC Power Requirements
US:
Europe:
Korea:
Japan:
Note: MR10Smk3 subwoofers do not support multiple voltage
configurations. Make sure the voltage rating for your particular
model (as indicated on the rear panel near the IEC socket)
corresponds with your local AC mains voltage.
AC Connector: 3-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 2.5 AL / 250 V
230 VAC: T 1.25 mAL / 250 V
Power Consumption:
250 watts with music, loud mix
13 watts quiescent (idle)
Physical Dimensions and Weight
Enclosure:
Damping:
Dimensions:
Height:
Width:
Depth:
Weight:
Disclaimer
LOUD Technologies is always striving to improve our products
by incorporating new and improved materials, components and
manufacturing methods. Therefore, we reserve the right to
change these specifications at any time without notice.
The following are trademarks or registered trademarks of
LOUD Technologies Inc.: MR Series and the Running Man.
This manual also contains names and marks of other companies
which belong to those respective companies, and are hereby
acknowledged.
©2013 LOUD Technologies Inc. All Rights Reserved.
120 VAC, 60 Hz
240 VAC, 50 Hz
220 VAC, 60 Hz
100 VAC, 50/60 Hz
0.625 in / 15 mm thick MDF with
0.98 in / 25 mm MDF front panel
Adiabatic batting
15 in / 381 mm
12.6 in / 320 mm
15 in / 381 mm
27.3 lb / 12.4 kg
Owner's Manual
13