Mackie PPM1008 Owner's Manual page 8

Wireless
Microphone Microphones
Graphic EQ
Wireless Mic
Receiver
MAIN OUT BOOTH
L R L L
LINE
MIC
LIVE
RECORD
L(MONO)
R
~100-240 VAC 50-60Hz 20W
L
R
Turntables with phono-level output
This diagram shows a wireless microphone receiver connected to the channel 1 line input, a graphic
EQ connected to channel 1's insert jack (to help control feedback in the wireless mic), a microphone
connected to channel 2, and an iPod docking station attached to channel 8's RCA inputs.
A Mackie d.2 Pro DJ production console is connected to two turntables, and its RCA output connects to
the powered mixer's channel 7 stereo RCA inputs. Use the d.2 Pro's advanced DJ controls to get the best
performance from your records. Use the powered mixer to play the d.2 Pro output, and control the mics
and iPod.
The power amp mode switch is set to play the stereo main mix in the C300z passive speakers,
connected to the speaker-level power outputs.
Passive subwoofers are powered by an amplifier connected to the main mix sub out, to reinforce the
low end in your main mix.
8
PPM1008
iPod Docking Station
TM
Mackie d.2 Pro
DJ Production Console
FX PGM 2 PGM 1 MIC
PHONO CD PHONO CD
SEND
R L L L L
R R R R
RETURN
R
LINE GND LINE GND
PHONO PHONO
Front Panel
Power
Amplifier
Passive Subwoofers
(plays main mix below 100 Hz)
DJ System
Power Amp Mode
switch set to
Stereo Mains
Rear Panel
C300z Passive Speakers
(plays stereo main mix)