Arm ® Cortex ® -M4 Processor Core Subsystem - Texas Instruments SimpleLink CC3235MODS Manual

Dual-band wireless mcu module
Table of Contents

Advertisement

CC3235MODS, CC3235MODSF
SWRS224A – FEBRUARY 2019 – REVISED AUGUST 2019
®
®
6.3
Arm
Cortex
-M4 Processor Core Subsystem
The high-performance Arm
minimal memory implementation, reduced pin count, and low power consumption, while delivering
outstanding computational performance and exceptional system response to interrupts.
®
The Cortex
-M4 core has low-latency interrupt processing with the following features:
– A 32-bit Arm
– Handler and thread modes
– Low-latency interrupt handling by automatic processor state saving and restoration during entry and
exit
– Support for ARMv6 unaligned accesses
Nested vectored interrupt controller (NVIC) closely integrated with the processor core to achieve low-
latency interrupt processing. The NVIC includes the following features:
– Bits of priority configurable from 3 to 8
– Dynamic reprioritization of interrupts
– Priority grouping that enables selection of preempting interrupt levels and nonpreempting interrupt
levels
– Support for tail-chaining and late arrival of interrupts, which enables back-to-back interrupt
processing without the overhead of state saving and restoration between interrupts
– Processor state automatically saved on interrupt entry and restored on interrupt exit with no
instruction overhead
– Wake-up interrupt controller (WIC) providing ultra-low-power sleep mode support
Bus interfaces:
– Advanced high-performance bus (AHB-Lite) interfaces: system bus interfaces
– Bit-band support for memory and select peripheral that includes atomic bit-band write and read
operations
Low-cost debug solution featuring:
– Debug access to all memory and registers in the system, including access to memory-mapped
devices, access to internal core registers when the core is halted, and access to debug control
registers even while SYSRESETn is asserted
– Serial wire debug port (SW-DP) or serial wire JTAG debug port (SWJ-DP) debug access
– Flash patch and breakpoint (FPB) unit to implement breakpoints and code patches
64
Detailed Description
®
®
Cortex
-M4 processor provides a low-cost platform that meets the needs of
®
®
Thumb
instruction set optimized for embedded applications
Submit Documentation Feedback
Product Folder Links:
CC3235MODS CC3235MODSF
Copyright © 2019, Texas Instruments Incorporated
www.ti.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Simplelink cc3235modsf

Table of Contents